40 Amp Manual Transfer Switch

ICHYTI is a China supplier and manufacturer that specializes in producing high-quality 40 amp manual transfer switch. With extensive years of experience in the industry, we aim to establish a long-term business relationship with our clients. ICHYTI offers excellent OEM services and has over 12 years of experience in the solar system field. Furthermore, we have the capability of independent research and development, ensuring that we provide innovative and top-of-the-line products.

Send Inquiry PDF DownLoad

Product Description

China ICHYTI Customized 40 amp manual transfer switch Free Sample has four functions, namely switch conversion and isolation, and can flexibly switch between two loads. It is installed using DIN standard rails 35×75 installation, the shell is made of PA66 injection molding, with high flame retardant performance. It can be an ideal solution for switching on and off in industrial equipment and circuits. The rated current of 40 amp manual transfer switch is 40A/63A, making installation and wiring on the guide rail convenient and safe.

ICHYTI 40 amp manual transfer switch Parameter (Specification)

Product Model	SF 219G
Pole	2P	4P
Rated Current (A)	40, 63	40, 63
Rated Voltage (V)	230/400	230/400
Contact form	1-0-2
Working Temperature	-5℃ -+40℃
Enclosed Class	IP20
Installation	Rail installation
Frequency	50/60Hz
日metrical Life	Not less than 1 500 times
Mechanical Life	Not less than 8500 times

ICHYTI 40 amp manual transfer switch Instructions for use

2P MTS:

◉ When the handle hits the I position: 1 and 2 are connected, 5 and 6 are connected.

◉ When the handle hits the II position: 1 and 4 are connected, 5 and 8 are connected.

◉ When the handle is in the middle position: both groups are disconnected.

4P MTS:

◉ When the handle hits the I position: 1 and 2 are connected, 5 and 6 are connected, 9 and 10 are connected, 13 and 14 are connected.

◉ When the handle hits the II position: 1 and 4 are connected, 5 and 8 are connected, 9 and 12 are connected, 13 and 16 are connected.

◉ When the handle is in the middle position: both groups are disconnected.

◉ The position of the incoming and outgoing wires can be adjusted according to actual needs (the upper and lower out are not necessarily required, when used for dual power switching, the lower in and upper out must be used.)